Missing Mid-point Grips

Problem: The middle grips are missing making it difficult to adjust the size of objects while keeping it orthogonal.

 Solution:
  1. Open up the system variables:
    • (Ribbon) Express Tools -> Tools: System Variables
    • (Command) SYSVDLG
  2. Select "GRIPS" on the left.
  3. Change the value under "New Value" to 2. 
  4. Click "OK".

Comments

Post a Comment

Popular posts from this blog

Alignment to Polyline: How to Make a Polyline Copy of an Alignment or Profile

Sometimes we need a polyline copy of an alignment whether it's for presentation, making target lines, drawing right-of-way lines, etc.   *update (JHK 2018-07-29)* The easiest way to create a polyline copy of an alignment is to just select the alignment and use the offset command. I will test if it can be offset by 0 (I doubt it). If not, just offset it back. I will also test if the offset command works on profile and re-update this article.  Here is how to make a polyline copy of an alignment: Adjust the alignment or profile style to prepare. Usually this involves making sure that the line layer is turned on and the extension lines and markers are turned off. Copy the alignment/profile. Select the copy of the alignment/profile and explode it. It should have turned into a block. (Optional) Select the block and isolate it. It helps to do this when there is a lot of clutter around the alignment in question. This can be done either via the light bulb icon in th...
Continue »

The XLIST Window is too Narrow!

The default width of the XLIST information window is quite narrow. If either the layer name or the drawing name is long, you may not be able to see all the layer information from an xlist. It's a lot easier to see the layer name if the dialogue box is set wider.  Here is how to change the width of the xlist dialogue box: Go to the following folder: C:\Program Files\Autodesk\Autodesk AutoCAD Civil 3D 2014\Express Open the file XLIST.DCL with a text editor. Look for instances of the following setting : text {         key = "sLayer";         width = 30;       } In each instance of the seeting, change the width value to something bigger. I use 150 myself. e.g.: : text {         key = "sLayer";         width = 150;       } Note that there are three instances of this setting in the fil...
Continue »

How Can I Freeze the Alignment but Keep the Alignment Label?

Sometimes we will want to turn off the alignment lines but keep the stationing on like below: Doing this with layer-control doesn't work; Freezing an alignment will freeze the alignment label. Same with turning it off. What this means is that to hide the alignment lines but keep the alignment labels on, you have to do it through visibility settings in the alignment style. That is, you have to go into the alignment style dialogue, go to the "Display" tab, and turn off the light bulb for the things you want to hide. Additional notes on the subject: Usually I have an alignment style called "None" that already has everything set to not-visible so that I can hide an alignment quickly without messing up my standard alignment style. Visibility setting has the same icon as the layer on/off icon which I find misleading because they're not the same thing at all.
Continue »